Vertical Roof Garages are the most durable of all of the garages that we offer. Like boxed eave garages, these units feature the A-Frame roof system. Where the boxed eave has horizontally oriented roof panels, the Vertical Roof Metal Garages have vertically oriented panels. The corrugated ridges run up and down and that orientation is always used on a house or building roof so that drainage is not impeded, as can be the case with horizontally oriented panels. Since vertical is the best orientation on a roof, customers often ask why we offer roof systems with horizontal panels (regular style and boxed eave). Some customers want a lower cost building and since there are less components used to build the horizontal roof system, they are less expensive. Also, competitors offer these units and since customers want them, we offer them. The vertical roof system is always best on any garage because it is less prone to leaks over time. We do not even offer garages longer than 36' with a horizontal roof system and all units wider than 30' employ only the best vertical roof system. Take a look below at our product offering of the best metal roof system that you can own.
Vertical Roof Metal Shop Building 40'Wx60'Lx12'H
Pre-Fab Metal Building with Vertical Roof 30'Wx51'Lx12'H
Engineered Metal Building with Vertical Roof 36'Wx40'Lx12'H
Vertical Roof -Car Garage '22Wx31'Lx9'H
Vertical Roof Enclosed Steel Garage with Lean-to 24'Wx31'Lx12'H
Vertical Roof Enclosed Workshop 30'Wx41'Lx14'H
Vertical Roof 2-Car Metal Garage 22'Wx31'Lx9'H
Vertical Roof 2-Car Enclosed Garage 22'Wx26'Lx9'H
Vertical Roof 1-Bay Metal Worskhop 24'Wx26'Lx10'H
Vertical Roof Backyard Storage Garage 20'Wx21'Lx7'H
Call for Price: 844-337-4137
Vertical Roof Metal Workshop Building 24'Wx31'Lx10'H
Vertical Roof 2-Car Side Entry Garage 24'Wx26'Lx9'H with All-Vertical Deluxe Wainscot Side and End Panels
Go with the Vertical Roof Garage if you want the longest lasting unit that you can own. In addition to the vertical panel ridge orientation, this roof system utilizes additional framing components, such as hat channel or purlins, to support the roof panels and to tie the frame together. On the other two roof systems, only the panels tie the roof system together with the frame. A true ridge cap at the apex of the roof is also used and that component is not a part of the regular style or boxed eave style roof, since the horizontal panels simply roll over the peak of the building. Thus, a ridge cap is not needed on any of the horizontal roof systems. In addition to the hat channel, the vertical roof garage has a deeper roof end and roof side trim, giving it a much nicer, finished appearance.
Vertical roof metal garages are available in widths up to 60' wide and in side heights up to 20' tall. We can install these units on most any site that is level, on concrete, ground, grass, gravel, asphalt, and even wood decks. Engineer certification is available for all of the metal garages that we offer. However, we cannot provide certification on units installed on a wood foundation and we do not install on floating boat docks.
Both 14 gauge and 12 gauge framing systems are available. 29 gauge steel panels, as well as optional 26 gauge panels are also available. A variety of garage door sizes from 6' wide up to 12' wide are in stock and garage door heights up to 14' tall are available, as well. Garage doors, windows, personnel doors can be installed on the end or the side walls. Other options, such as lean-tos, interior end walls, and insulation are available in most areas. We offer 13 color choices and that be mixed or match to create a beautiful look for your new garage or workshop on your property. Call us today and we will help you get the perfect, A-frame Vertical Roof Garage that works for you!